Skip to content
English
  • There are no suggestions because the search field is empty.

Tapping Metal Cards

How to tap my metal card?

This section will give you the best practices on how to properly tap and use your metal card. 

Please bear in mind:

  • NFC wiring is on the colored side of metal cards, opposite the QR code side.

  • We recommend holding the tap for at least 3 seconds.

  • You can use the QR code with older phone models or when NFC is off. ‍

‍Note: For both Androids and iPhones, please verify if the device is NFC compatible. 

iOS: NFC sweet spot and contact saving instructions

  • For compatible iPhones, the cards need to be tapped at the top front/back of the phone over the camera. Depending on the phone model, the NFC reader will be located at the top back.

  • The screen needs to be lit up before tapping— the device can still be locked.

  • Safari downloads and opens the Vcard right away; however, Chrome and other browsers require the user to manually click download and then open the file to save the contact information.

Android: NFC sweet spot and contact saving instructions

  • For compatible Android devices, the card needs to be taped in the middle back of the phone.

  • The screen needs to be lit, and the device needs to be unlocked.

  • With Androids, you will either be prompted to download the VCF (Vcard) file, which is your contact card, or it will download automatically (based on system preferences). After the download, you will need to open up your downloads folder to open the file.

 

Any questions?

If you require assistance tapping your card, kindly contact us, and we will be happy to help!

If you are already chatting with us, type "Live Support," and you will be connected with one of our specialists, or contact us via email at support@mobilocard.com, and we can answer any questions you may have.